This post was previously written by Noel Dyson and  published via Australia's Mining Monthly
Noel Dyson
Noel Dyson
28th Aug, 2020 | 6 mins to read
The following was taken from the Sumitomo Corporation Business Report 152nd Newsletter to Shareholders April 1, 2019 through March 31, 2020
Richard Marshall
Richard Marshall
07th Aug, 2020 | 1 mins to read
Why you should consider integrating automated failure analysis investigations into your operations When a component fails, there'll be a story in the oil…
Angus Lay
Angus Lay
07th Aug, 2020 | 3 mins to read
Maintenance and reliability professionals will be familiar with the P-F Curve developed by John Moubray in his book ‘RCM II’ which utilises a graph to…
Matt McLeod
Matt McLeod
21st Jul, 2020 | 3 mins to read
Think of the concept; Good oil condition = greater reliability and increased component life. A simple concept, but we see the benefits for equipment…
Angus Lay
Angus Lay
10th Jul, 2020 | 2 mins to read
From our experience we estimate that on average, 80% of data generated from oil sample reports are not fully utilised.  That’s remarkable.  Imagine your…
Richard Marshall
Richard Marshall
10th Jun, 2020 | 2 mins to read
Everyone has their limits.  You get pushed past your limits and you’re definitely not at your best whether it’s physical or mental.  It’s no different for…
Relialytics
Relialytics
10th Jun, 2020 | 1 mins to read
Since January we assisted a customer to fully utilise data from their oil sample reports.  Since our engagement, the percentage of compartments with dirt…
Relialytics
Relialytics
10th Jun, 2020 | 2 mins to read
It won’t come as a surprise to maintenance professionals that the most common issue we find with Final Drives is the ingress of dirt into the oil…
Relialytics
Relialytics
15th May, 2020 | 3 mins to read
We are always keen to share our learning and just this week our team was analysing several sets of oil sample data from two sites owned by the same…
Relialytics
Relialytics
09th Apr, 2020 | 3 mins to read
Centrifugal or spinner filters have been around for some time now, initially in niche applications or fitted as an aftermarket accessory. However today, an increasing number of OEMS are installing them as standard fitment on their engines. This is due largely to the impressive filtration capabilities of these systems, and their ability to remove not only wear and external contamination, but also…
Relialytics
Relialytics
16th Mar, 2020 | 2 mins to read
Top